1012 BigIron RX Series Configuration Guide53-1001986-01Reading CDP packets37Syntax: show fdp entry * | <device-id>To display CDP entries for a specific device, specify the device ID. Here is an example.Displaying CDP statisticsTo display CDP packet statistics, enter the following command.BigIron RX# show fdp trafficCDP counters:Total packets output: 0, Input: 3Hdr syntax: 0, Chksum error: 0, Encaps failed: 0No memory: 0, Invalid packet: 0, Fragmented: 0Syntax: show fdp trafficClearing CDP informationYou can clear the following CDP information:• Cisco Neighbor information• CDP statisticsTo clear the Cisco neighbor information, enter the following command.BigIron RX# clear fdp tableSyntax: clear fdp tableBigIron RX# show fdp entry *Device ID: RouterEntry address(es):IP address: 207.95.6.143Platform: cisco RSP4, Capabilities: RouterInterface: Eth 1/1, Port ID (outgoing port): FastEthernet5/0/0Holdtime : 124 secondsVersion :Cisco Internetwork Operating System SoftwareIOS (tm) RSP Software (RSP-JSV-M), Version 12.0(5)T1, RELEASE SOFTWARE(fc1)Copyright (c) 1986-1999 by cisco Systems, Inc.Compiled Thu 19-Aug-99 04:12 by cmongBigIron RX# show fdp entry Router1Device ID: Router1Entry address(es):IP address: 207.95.6.143Platform: cisco RSP4, Capabilities: RouterInterface: Eth 1/1, Port ID (outgoing port): FastEthernet5/0/0Holdtime : 156 secondsVersion :Cisco Internetwork Operating System SoftwareIOS (tm) RSP Software (RSP-JSV-M), Version 12.0(5)T1, RELEASE SOFTWARE(fc1)Copyright (c) 1986-1999 by cisco Systems, Inc.Compiled Thu 19-Aug-99 04:12 by cmong
