634 BigIron RX Series Configuration Guide53-1001986-01Configuring MSDP mesh groups23 Displaying MSDP informationYou can display the following MSDP information:• Summary information – the IP addresses of the peers, the state of the BigIron RX’s MSDPsession with each peer, and statistics for Keepalive, Source Active, and Notification messagessent to and received from each of the peers.• Peer information – the IP address of the peer, along with detailed MSDP and TCP statistics.• Source Active cache entries – the Source Active messages cached by the BigIron RX.Displaying summary informationTo display summary MSDP information, enter the following command at any level of the CLI.Syntax: show ip msdp summaryThis display shows the following information.TABLE 103 MSDP summary informationThis field... Displays...Peer Address The IP address of the peer’s interface with the BigIron RXState The state of the MSDP router’s connection with the peer. The state canbe one of the following:• CONNECTING – The session is in the active open state.• ESTABLISHED – The MSDP session is fully up.• INACTIVE – The session is idle.• LISTENING – The session is in the passive open state.KA In The number of MSDP Keepalive messages the MSDP router hasreceived from the peerKA Out The number of MSDP Keepalive messages the MSDP router has sent tothe peerSA In The number of Source Active messages the MSDP router has receivedfrom the peerSA Out The number of Source Active messages the MSDP router has sent to thepeerNOT In The number of Notification messages the MSDP router has receivedfrom the peerNOT Out The number of Notification messages the MSDP router has sent to thepeerBigIron RX# show ip msdp summaryMSDP Peer Status SummaryKA: Keepalive SA:Source-Active NOT: NotificationPeer Address State KA SA NOTIn Out In Out In Out206.251.17.30 ESTABLISH 3 3 0 640 0 0206.251.17.41 ESTABLISH 0 3 651 0 0 0
