610 BigIron RX Series Configuration Guide53-1001986-01Displaying PIM Sparse configuration information and statistics23Displaying BSR informationTo display BSR information, enter the following command at any CLI level.This example show information displayed on a BigIron RX that has been elected as the BSR. Thefollowing example shows information displayed on a BigIron RX that is not the BSR. Notice thatsome fields shown in the example above do not appear in the example below.BigIron RX(config-pim-router)# show ip pim bsrPIMv2 Bootstrap informationBSR address = 207.95.7.1BSR priority = 5Syntax: show ip pim bsrThis display shows the following information.Group The multicast group addressPorts The BigIron RX ports connected to the receivers of the groups.This field... Displays...BSR address The IP address of the interface configured as the PIM Sparse BootstrapRouter (BSR).Uptime The amount of time the BSR has been running.NOTE: This field appears only if this BigIron RX is the BSR.BSR priority The priority assigned to the interface for use during the BSR electionprocess. During BSR election, the priorities of the candidate BSRs arecompared and the interface with the highest BSR priority becomes theBSR.Hash mask length The number of significant bits in the IP multicast group comparisonmask. This mask determines the IP multicast group numbers for whichthe BigIron RX can be a BSR. The default is 32 bits, which allows theBigIron RX to be a BSR for any valid IP multicast group number.NOTE: This field appears only if this BigIron RX is a candidate BSR.This field... Displays...BigIron RX(config-pim-router)# show ip pim bsrPIMv2 Bootstrap informationThis system is the elected Bootstrap Router (BSR)BSR address: 207.95.7.1Uptime: 00:33:52, BSR priority: 5, Hash mask length: 32Next bootstrap message in 00:00:20Next Candidate-RP-advertisement in 00:00:10RP: 207.95.7.1group prefixes:224.0.0.0 / 4Candidate-RP-advertisement period: 60
