Monitor time: 00:00:00 Refresh Intvl.: 2sInterface: Te 1/1/1/1, Disabled, Link is Down, Linespeed is 1000 MbitTraffic statistics: Current Rate DeltaInput bytes: 0 0 Bps 0Output bytes: 0 0 Bps 0Input packets: 0 0 pps 0Output packets: 0 0 pps 064B packets: 0 0 pps 0Over 64B packets: 0 0 pps 0Over 127B packets: 0 0 pps 0Over 255B packets: 0 0 pps 0Over 511B packets: 0 0 pps 0Over 1023B packets: 0 0 pps 0Error statistics:Input underruns: 0 0 pps 0Input giants: 0 0 pps 0Input throttles: 0 0 pps 0Input CRC: 0 0 pps 0Input IP checksum: 0 0 pps 0Input overrun: 0 0 pps 0Output underruns: 0 0 pps 0Output throttles: 0 0 pps 0m - Change mode c - Clear screenl - Page up a - Page downT - Increase refresh interval t - Decrease refresh intervalq - QuitqDell#Split 40G Ports on a 16X40G QSFP+ ModuleYou can only split the 40G ports in the top row (odd numbered ports) on a 16X40G module. If you configure 4X10G on a 40G interface, thesubsequent even numbered interface is removed and unavailable for use.The following example shows the interface status before splitting a 40G interface:Dell# show interfaces statusPort Description Status Speed Duplex VlanFo 1/3/1 Down 40000 Mbit Auto --Fo 1/3/2 Down 40000 Mbit Auto --The following example shows that when you split an interface on a 16X40G module, the subsequent even numbered interface is removedfrom the configuration.Dell(conf)# stack-unit [stack-unit number] module [module number] port [port number] portmodequad speed 10GWarning: Enabling Quad mode on stack-unit 1 module 3 port 1. Please verify whether the configsrelated to interface Fo 1/3/1 Fo 1/3/2 are cleaned up before proceeding further.[confirm yes/no]:yQuad mode is enabled on stack-unit 1 module 3 port 1The interface on stack-unit 1 slot 3 port 2 has been removed%STKUNIT1-M:CP %IFMGR-5-DYNAMIC_FANOUT: Port 1 in module 3 and slot 1 has been fanned-outThe following example shows that the even numbered interface is removed from the configuration:Dell# show interfaces statusPort Description Status Speed Duplex VlanTe 1/3/1/1 Up 10000 Mbit Full --Te 1/3/1/2 Up 10000 Mbit Full --Te 1/3/1/3 Up 10000 Mbit Full --Te 1/3/1/4 Up 10000 Mbit Auto --396 Interfaces
