Examples for Creating a DSCP Color MapDisplay all DSCP color maps.Dell# show qos dscp-color-mapDscp-color-map mapONEyellow 4,7red 20,30Dscp-color-map mapTWOyellow 16,55Display a specific DSCP color map.Dell# show qos dscp-color-map mapTWODscp-color-map mapTWOyellow 16,55Displaying a DSCP Color Policy ConfigurationTo display the DSCP color policy configuration for one or all interfaces, use the show qos dscp-color-policy {summary[interface] | detail {interface}} command in EXEC mode.summary: Displays summary information about a color policy on one or more interfaces.detail: Displays detailed color policy information on an interfaceinterface: Enter the name of the interface that has the color policy configured.Examples for Displaying a DSCP Color PolicyDisplay summary information about a color policy for one or more interfaces.Display summary information about a color policy for a specific interface.Display detailed information about a color policy for a specific interfaceCreate Policy MapsThere are two types of policy maps: input and output.Creating Input Policy MapsThere are two types of input policy-maps: Layer 3 and Layer 2.1 Create a Layer 3 input policy map.CONFIGURATION modepolicy-map-inputCreate a Layer 2 input policy map by specifying the keyword layer2 with the policy-map-input command.2 After you create an input policy map, do one or more of the following:Applying a Class-Map or Input QoS Policy to a QueueApplying an Input QoS Policy to an Input Policy Map708 Quality of Service (QoS)
