Example of Logging in to Copy from NFS MountDell#copy nfsmount:///test flash:Destination file name [test]: test2!5592 bytes successfully copiedDell#Dell#copy nfsmount:///test.txt ftp://10.16.127.35Destination file name [test.txt]:User name to login remote host: usernamePassword to login remote host:!Example of Copying to NFS MountDell#copy flash://test.txt nfsmount:///Destination file name [test.txt]:!15 bytes successfully copiedDell#copy flash://test/capture.txt.pcap nfsmount:///Destination file name [test.txt]:!15 bytes successfully copiedDell#copy flash://test/capture.txt.pcap nfsmount:///username/snoop.pcap!24 bytes successfully copiedDell#Dell#copy tftp://10.16.127.35/username/dv-maa-test ?flash: Copy to local file system ([flash://]filepath)nfsmount: Copy to nfs mount file system (nfsmount:///filepath)running-config remote host:Destination file name [test.c]:!225 bytes successfully copiedDell#Save the Running-ConfigurationThe running-configuration contains the current system configuration. Dell Networking recommends coping your running-configuration tothe startup-configuration.The commands in this section follow the same format as those commands in the Copy Files to and from the System section but use thefilenames startup-configuration and running-configuration. These commands assume that current directory is the internal flash, which isthe system default.• Save the running-configuration to the startup-configuration on the internal flash of the primary RPM.EXEC Privilege modecopy running-config startup-config• Save the running-configuration to an FTP server.EXEC Privilege modecopy running-config ftp:// username:password@{hostip | hostname}/filepath/ filename• Save the running-configuration to a TFTP server.EXEC Privilege modecopy running-config tftp://{hostip | hostname}/ filepath/filename• Save the running-configuration to an SCP server.EXEC Privilege modecopy running-config scp://{hostip | hostname}/ filepath/filename52 Getting Started
