vlt domain domain-idThe range of domain IDs is from 1 to 1000.7 Enter the port-channel number that acts as the interconnect trunk.VLT DOMAIN CONFIGURATION modepeer-link port-channel id-number8 (Optional) To configure a VLT LAG, enter the VLAN ID number of the VLAN where the VLT forwards packets received on the VLTifrom an adjacent peer that is down.VLT DOMAIN CONFIGURATION modepeer-link port-channel id-number peer-down-vlan vlan interface numberAssociating the VLT LAG or VLT VLAN in a PVLAN1 Access INTERFACE mode for the port that you want to assign to a PVLAN.CONFIGURATION modeinterface interface2 Enable the port.INTERFACE modeno shutdown3 Set the port in Layer 2 mode.INTERFACE modeswitchport4 Select the PVLAN mode.INTERFACE modeswitchport mode private-vlan {host | promiscuous | trunk}• host (isolated or community VLAN port)• promiscuous (intra-VLAN communication port)• trunk (inter-switch PVLAN hub port)5 Access INTERFACE VLAN mode for the VLAN to which you want to assign the PVLAN interfaces.CONFIGURATION modeinterface vlan vlan-id6 Enable the VLAN.INTERFACE VLAN modeno shutdown7 To obtain maximum VLT resiliency, configure the PVLAN IDs and mappings to be identical on both the VLT peer nodes. Set the PVLANmode of the selected VLAN to primary.INTERFACE VLAN modeprivate-vlan mode primary8 Map secondary VLANs to the selected primary VLAN.INTERFACE VLAN modeprivate-vlan mapping secondary-vlan vlan-list972 Virtual Link Trunking (VLT)
