Example of the grep KeywordDell#show system brief | grep Management1 Management online S6100-ON S6100-ON 9.10(0.0) 130Dell#NOTE: Dell Networking OS accepts a space or no space before and after the pipe. To filter a phrase with spaces, underscores, orranges, enclose the phrase with double quotation marks.The except keyword displays text that does not match the specified text. The following example shows this command used incombination with the show system brief command.Example of the except KeywordDell#show system brief | except 1Stack MAC : 4c:76:25:e5:49:40Reload-Type : normal-reload [Next boot : normal-reload]The find keyword displays the output of the show command beginning from the first occurrence of specified text. The following exampleshows this command used in combination with the show system brief command.Example of the find KeywordDell#show system brief | find Management1 Management online S6100-ON S6100-ON 9.10(0.0) 130-- Power Supplies --Unit Bay Status Type FanStatus FanSpeed(rpm)---------------------------------------------------------------------------1 1 up AC up 9168The display command displays additional configuration information.The no-more command displays the output all at once rather than one screen at a time. This is similar to the terminal lengthcommand except that the no-more option affects the output of the specified command only.The save command copies the output to a file for future reference.NOTE: You can filter a single command output multiple times. The save option must be the last option entered. For example:Dell# command | grep regular-expression | except regular-expression | grep other-regular-expression | find regular-expression | save.Multiple Users in Configuration ModeDell Networking OS notifies all users when there are multiple users logged in to CONFIGURATION mode.A warning message indicates the username, type of connection (console or VTY), and in the case of a VTY connection, the IP address ofthe terminal on which the connection was established. For example:• On the system that telnets into the switch, this message appears:% Warning: The following users are currently configuring the system:User "" on line console0• On the system that is connected over the console, this message appears:% Warning: User "" on line vty0 "10.11.130.2" is in configuration modeConfiguration Fundamentals 43
