SUPPORTASSIST SERVER mode[no] proxy-ip-address {ipv4-address | ipv6-address}port port-number [ username useridpassword [encryption-type] password ]Dell(conf-supportassist-serv-default)#proxy-ip-address 10.0.0.1 port 1024 username testpassword 0 test1Dell(conf-supportassist-serv-default)#3 Enable communication with the SupportAssist server.SUPPORTASSIST SERVER mode[no] enableDell(conf-supportassist-serv-default)#enableDell(conf-supportassist-serv-default)#4 Configure the URL to reach the SupportAssist remote server.SUPPORTASSIST SERVER mode[no] url uniform-resource-locatorDell(conf-supportassist-serv-default)#url https://192.168.1.1/index.htmDell(conf-supportassist-serv-default)#Viewing SupportAssist ConfigurationTo view the SupportAssist configurations, use the following commands:1 Display information on the SupportAssist feature status including any activities, status of communication, last time communicationsent, and so on.EXEC Privilege modeshow support-assist statusDell#show support-assist statusSupportAssist Service: InstalledEULA: AcceptedServer: defaultEnabled: YesURL: https://stor.g3.ph.dell.comServer: DellEnabled: YesURL: http://1.1.1.1:1337Service status: EnabledActivity State Last Start Last Success----------------------- ------- ------------------------ ------------------------core-transfer Success Feb 15 2016 09:43:41 IST Feb 15 2016 09:43:56 ISTevent-transfer Success Feb 15 2016 09:47:43 IST Feb 15 2016 09:48:21 ISTfull-transfer Success Feb 15 2016 09:36:12 IST Feb 15 2016 09:38:27 ISTDell#2 Display the current configuration and changes from the default values.EXEC Privilege modeshow running-config support-assistDell# show running-config support-assist!support-assistenable all!SupportAssist 885
