4–60 889 GENERATOR PROTECTION SYSTEM – INSTRUCTION MANUALDEVICE CHAPTER 4: SETPOINTSAUTORESETRange: Disabled, EnabledDefault: DisabledThis setting enables the Tab Pushbutton Autoreset feature. The setting is applicable onlyif the pushbutton is in “Latched” mode.AUTORESET DELAYRange: 0.2 to 600.0 s in steps of 0.1 sDefault: 1.0 sThis setting specifies the time delay for automatic Reset of the pushbutton when in the“Latched” mode.LOCKRange: Any FlexLogic operandDefault: OffThis setting assigns a FlexLogic operand to inhibit pushbutton operation from the frontpanel pushbuttons. This locking functionality is not applicable to pushbutton autoreset.DROPOUT TIMERange: 0.0 s to 600.0 s in steps of 0.1 sDefault: 0.0 sThis setting applies only to “Self-reset” mode and specifies the duration of thepushbutton “active” status after the pushbutton has been released. The length of timethe operand remains on has no effect on the pulse duration.The setting is required to set the duration of the pushbutton operating pulse.EVENTSRange: Disabled, EnabledDefault: Enabled
