WakesetterCommand CenterThe Malibu dash features two video screens through which most ofthe functionality of the boat operation is controlled. On the lower leftis standard storage or an optional Sport Dash (shown). It is explainedin further detail in the How It Works section of this owner’s manual.Engine Start CodeThe driver will be prompted to enter an ENGINE START CODEon the 7” display each time the power button is pressed ON or theignition key is cycled.To change the start code, touch CHANGE and enter the currentcode followed by the new code.To disable the prompt, touch the DISABLE and enter the currentcode. To RE-ENABLE the start code prompt, go into the settings menuand select SHOW ENGINE CODE. From that menu,select SHOW.NOTICE: Upon entry of the correct code, or ignitionif code prompt is disabled, the blower will turn on forfour (4) minutes in preparation for engine starting.Text/Phone AlertA pop-up alert signals a new incoming text message orphone call.System OverviewThe system architecture combines an industry leading 12.3” and a7” LCD placing the most commonly used controls and information onthe top surface. Critical information is always in view and the centerof the 12.3” screen swaps out with a touch of a button.1 - Current Water depth2 - Engine Hours3 - 8-Point Compass Heading4 - Go Home Mode Button5 - Night Mode Button6 - Speed Input7- Engine Temperature Gauge8 - Oil Pressure Gauge9 - Viper II Clock/Blue Tooth/Audio Info10 - Voltage Gauge11 - Save Button12 - Fuel Gauge13 - Dock Mode Button2019 Malibu Boats, LLC Owner’s Manual • Page 62https://www.boat-manuals.com/
