Malibu Boats Wakesetter 20VTX 2019 Owner's Manual

Contents

Malibu Boats Wakesetter 20VTX 2019 Owner's Manual Manual pdf 77 page image

2019 Malibu Boats, LLC Owner’s Manual • Page 64Wake ViewThe WAKE VIEW screen provides a simplified wake control interface.Use the BOAT/WAKE VIEW BUTTON to switch between modes.WAKE SIZE OPERATIONTouch DRAIN ALL to automatically empty all the tanks at once.Touch the SECOND button to fill the rear tanks to 25%.Touch the THIRD button to fill all the tanks to 25%.Touch the FOURTH button to fill the rear tanks to 50% and the fronttanks to 25%.Touch the FIFTH button to fill all tanks to 50%.Touch the SIXTH button to fill the rear tanks to 75% and the fronttanks to 50%.Touch the SEVENTH BUTTON to fill all the tanks to 75%.Touch the EIGHTH button to fill the rear tanks to 100% and thefront tanks to 75%.Wake Shape OperationThe Wake Shape Control functions the same as the POWERWEDGE Control. See POWER WEDGE operation instructions in thissection of the owner’s manual.Speed ControlAutomatically maintain a consistent cruising rate with SPEED CON-TROL. When turned on and engaged, the cruise control system willhold the speed of the boat once the ACTUAL SPEED has reachedthe desired SET SPEED.Speed Control OperationTurn SPEED CONTROL ON/OFF by touching the button to the leftof the displayed ACTUAL SPEED.1. With the engine running and in NEUTRAL, press the SPEEDCONTROL button to turn the system ON. The button will turngreen and ON will be displayed. SPEED READY will appearabove the THROTTLE BAR.2. Choose a desired SET SPEED by touching the SPEED UP/DOWN buttons.3. Advance the throttle position until the engine takes control andSPEED ENGAGED is displayed. A THROTTLE TARGET WIN-DOW will appear on the throttle bar until the engine disengagescruise.4. Keep the orange THROTTLE MARKER inside the THROTTLETARGET WINDOW.5. Throttle position adjustment is needed if the orange markermoves outside of the target window. If left of the window, MORETHROTTLE is displayed until the marker is moved forward. Ifright, OVER SPEED MODE is displayed until the marker is backinside the window. The driver has control of the boat speed untilthe marker is back inside the window and the system is engaged.6. Touch the SPEED UP/DOWN buttons to adjust the desired SETSPEED in 0.1 MPH increments once the SPEED CONTROL isengaged. Touch and hold the button for faster rate of change.7. Returning the throttle position to NEUTRAL will disengage thesystem. SPEED CONTROL is still ON, but disengaged.8. Turn OFF the system by touching the SPEED CONTROL buttonand returning the throttle position to NEUTRAL, which will disen-gaged the engine. SPEED OFF will appears above the throttlebar.Speed InputPress the SPEED INPUT button in to the lower left of the display toaccess the SPEED INPUT SETTINGS. Select between the desiredspeed input sources of Paddle Wheel or Zero Off - GPS. Changeswill not take place until throttle is put into IDLE position.Surf Gate ControlEasily create a surf wake and switch it from side to side with thepress of a button, without having to adjust the ballast.NOTICE: When speed exceeds 13.6 mph, the SURF GATES willautomatically move to the CENTER position until speed returnsto less than 13.6 mph.The SURF GATES must be calibrated before use to workproperly. Follow the procedure in the SURF GATE section in theSETTINGS menu in this section of the Owner’s Manual.https://www.boat-manuals.com/