2019 Malibu Boats, LLC Owner’s Manual • Page 637.0” Malibu Touch Command (MTC) DisplaySave Preset ButtonTouch the SAVE button to save all the current boat settings andcreate a new preset.Four Corner ButtonsThe four corners of the display provide convenient access to depth,display brightness, docking throttle profile, and the GO HOME preset.DEPTH: Water depth is displayed in the top left hand corner of thescreen. A graphical view of depth is available by touching the DEPTHSCREEN button at the top of the display.NIGHT: The NIGHT button toggles display brightness betweenNIGHT MODE and DAYTIME settings. These settings are adjusted inthe BACKLIGHTING section of the SETTINGS menu.DOCK: The DOCK mode button changes the throttle sensitivity tomake docking more controlled. Normal throttle sensitivity returns bytouching the DOCK button a second time.GO HOME: The GO HOME button enables GO HOME MODE.This mode turns speed control off, drains all tanks, moves the SURFGATE to center, and moves the POWER WEDGE to the stow posi-tion once the boat is moving between 2 and 10 mph.Depth ScreenThe DEPTH SCREEN shows a graphical representation of depth,in addition to water and air temperature readings.NOTICE: If the water depth is less than the set DEPTH heightthen a SHALLOW DEPTH ALARM will sound, and a notice willdisplay. The DEPTH height is adjusted in the CALIBRATIONsection of the SETTINGS menu.Ballast ScreenTouch the BALLAST SCREEN button to drain, fill, and view currentballast tank levels. Choose the perfect ballast combination to createa custom wake.NOTICE: TANK INDICATORS always display the ACTUALLEVEL in the tank whether resting, filling or draining. Optionalballast bags can ONLY be filled or drained by touching the FILLALL or DRAIN ALL buttons.Ballast Tank Operation1. Touch the TANK INDICATOR to change the level. The indicatorwill turn white. More than one can be selected if they have thesame DESTINATION LEVEL.2. Touch one of the five DESTINATION LEVEL choices E, 1/4, 1/2,3/4, or F. The TANK INDICATOR turns blur and continues to dis-play the ACTUAL LEVEL, but now includes a spinning progressindicator and filling or draining status above it.3. Once the DESTINATION LEVEL is reached, the pump and spin-ning indicator will stop.Touch STOP, and then touch the corresponding TANK INDICATORto stop any pump.Touch STOP ALL to stop all pumps at once, from filling or draining.Touch FILL ALL to fill all tanks at once. The filling process will stopwhen the tanks reach 100%.Touch DRAIN ALL to drain all tanks at once. The draining processwill stop once the tanks are completely empty.NOTICE: Once the FILL ALL or DRAIN ALL process is initiated,the pumps WILL NOT STOP until the user stops them or thesystem has powered down.https://www.boat-manuals.com/
