4-20IMPORTANT: User password setup is not available before Supervisor password setup. Do not set any password before installing the OS.See the table below for setup options on the screen.Option Parameter Description Your SettingSupervisorPassword is[Clear]SetIndicates Supervisor password setup status (viewonly).User Passwordis[Clear]SetIndicates User password setup status (view only).Set SupervisorPasswordUp to 7alphanumericcharactersPress Enter to display the supervisor passwordentry screen. With the supervisor password, allSETUP menus are available for access. Thisoption is available only when you log into theSETUP utility with the supervisor password.Set UserPasswordUp to 7alphanumericcharactersPress Enter to display the user password entryscreen. With a user password, accessing theSETUP menus is restricted. This option isavailable only if the Supervisor Password isspecified.Password onbootEnabled[Disabled]Specify whether to request a password entry atboot-up. Supervisor password setup is requiredbeforehand. When the supervisor password isspecified and this option is disabled, the BIOSassumes that a system boot attempt is made by auser.Power SwitchMask[Unmasked]MaskedEnable or disable the POWER switch on theserver. If "Masked" is selected, power-off with thePOWER switch becomes unavailable after OSboot-up. (Forced shut down also becomesunavailable. Forced shut down is a feature to shutdown by pressing the POWER switch for overfour seconds.)Option ROMMenu Mask[Unmasked]MaskedEnable or disable key entries during optionalROM expansion.[ ]: Factory-set
