4-43How to Clear Passwords36. Power off NEC Express5800/ft series and unplug the both power cords.37. Remove the both PCI modules (#1 and #2) from the NEC Express5800/ft series (see page8-31 “Removing PCI Module”).38. Open the top cover of the PCI Module #1.39. Make setting of jumper switch for clearing the password.Remove the clips from the jumper pins 11-12 and place them on the jumper pins 3-4 onthe PCI Module #1.40. Mount the PCI Module #1 to NEC Express5800/ft series (see page 8-33 “Installing PCIModule”).41. Plug the both power cords and when the POWER Switch LED turns on, press it to poweron NEC Express5800/ft series.42. When the following POST screen appears after the startup, press the POWER Switch toturn off the power.43. Unplug the both power cords.44. Remove PCI Module #1 from NEC Express5800/ft series (see page 8-31 “Removing PCIModule”).45. Reset the jumper switch setting.Remove the clips from the jumper pins 3-4 and place them on the jumper pins 11-12 onthe PCI Module #1.TIPS: If you place it on other pins, the server may malfunction.
