7-18On-screen error message Cause Action0BD6 3rd SMBus deviceaddress notacknowledged0BD7 3rd SMBus device Errordetected0BD8 3rd SMBus timeout-(3rd SMBus does not exist)0BD9 4th SMBus deviceaddress notacknowledged0BDA 4th SMBus device ErrorDetected0BDB 4th SMBus devicetimeoutCPU module board #2 is faulty.0BDC 5th SMBus deviceaddress notacknowledged0BDD 5th SMBus device Errordetected0BDE 5th SMBus timeout-(5th SMBus does not exist)0BDF 6th SMBus deviceaddress notacknowledged0BE0 6th SMBus device Errordetected0BE1 6th SMBus timeout-(6th SMBus does not exist)0BE2 7th SMBus deviceaddress notacknowledged0BE3 7th SMBus device Errordetected0BE4 7th SMBus timeoutBack panel board is faulty.0BE5 8th SMBus deviceaddress notacknowledged0BE6 8th SMBus device Errordetected0BE7 8th SMBus timeoutPCI module board #1 is faulty.• Check cable connection.• Replace the board.0BF0 Vendor ID cannot beretrieved from BPIDPROM0BF1 System Structure cannotbe retrieved from BPIDPROMBack panel board is faulty. Replace the back panel board.0C00 Rompilot reports errornumber xx• Configuration error inSETUP.• CPU/PCI module board isfaulty.• Re-configure Rompilot.• Replace the CPU/PCImodule board.8600 No working DQS valuefound• DIMM is faulty• DIMM is not supported• Replace DIMM• Replace DIMM withappropriate one.
