2-22PCI#1 PCI#2StatusLED 2DISKAccessLEDStatusLED 2DISKAccessLEDDescription ActionGreen Off Off Off The PCI module 1 isperforming diagnosis(Diag).AC power is notsupplied to the PCImodule 2.Wait for the OS to start. Afterthe OS starts, check theStatus LEDs and then takethe appropriate actions.If the problem persists,contact your sales agent.(4) Status LED 1 of only PCI module 2 is redPCI#1 PCI#2StatusLED 2DISKAccessLEDStatusLED 2DISKAccessLEDDescription ActionAmber Amber Off Off The PCI module 2 is onstandby (The PCImodule 2 has not beenpowered on yet.)The PCI module 1operates in simplexmode.Start the PCI module 2 from ftserver utility (See Chapter 5).Remount the PCI module 2.If the problem persists,contact your sales agent.Amber Amber Green Off The PCI module 2 isperforming diagnosis(Diag).The PCI module 1operates in simplexmode.Wait for the PCI module 2 tostart. When the PCI module 2starts and duplex mode isestablished, the indicationswill return to normal.Off Off Off Off Only the PCI module 2is on standby (ACpower is suppliedthrough the cord, butthe system has notbeen powered on yet.)AC power is notsupplied to the PCImodule 1.Check if the power cord isconnected correctly.Check the condition ofbreaker and UPS.Check if the power unit isconnected correctly.Remount the PCI module 1.If the problem persists,contact your sales agent.Off Off Green Off The PCI module 2 isperforming diagnosis(Diag).AC power is notsupplied to the PCImodule 1.Wait for the OS to start. Afterthe OS starts, check theStatus LEDs and then takethe appropriate actions.If the problem persists,contact your sales agent.
