5-39Procedure in NEC ESMPRO ManagerStart52. Select the target component in the [FTServer] tree.53. Check the current state with the "Status" display on the target component screen.54. Click the [Bring Up] button in the [Maintenance] screen for the target component.A certain time is required for the start.The start result can be confirmed by "State" on the target component screen. The result ofthe start operation is reported by the NEC Express5800/ft series as an alert.StopPerform the procedure below before replacing a component.55. Select the target component in the [FTServer] tree.56. Check the current state with the "State" display on the target component screen.57. Click the [Bring Down] button in the [Maintenance] screen for the target component.A certain time is required for the stop.The stop result can be confirmed by "State" on the target component screen. The result ofthe stop operation is reported by the NEC Express5800/ft series as an alert.Sample screen of NEC ESMPRO Manager 1[Maintenance] screen of PCI module[PCI Module] – [Maintenance]
