2-21(2) Status LED 1 of both PCI modules are redPCI#1 PCI#2StatusLED 2DISKAccessLEDStatusLED 2DISKAccessLEDDescription ActionOff Off Off Off On standby (AC poweris supplied through thecord, but the systemhas not been poweredon yet.)After turning on the power,wait for the OS to start. Whenthe OS starts and duplexmode is established, theindications will return tonormal. If they do not getback to normal, remount thePCI module.If the problem persists,contact your sales agent.Green Off Off Off The PCI module 1 isperforming diagnosis(Diag).Wait for the OS to start. Whenthe OS starts and duplexmode is established, theindications will return tonormal.Off Off Green Off The PCI module 2 isperforming diagnosis(Diag).Wait for the OS to start. Whenthe OS starts and duplexmode is established, theindications will return tonormal.(3) Status LED 1 of only PCI module 1 is redPCI#1 PCI#2StatusLED 2DISKAccessLEDStatusLED 2DISKAccessLEDDescription ActionOff Off Amber Amber The PCI module 1 is onstandby (The PCImodule 1 has not beenpowered on yet.)The PCI module 2operates in simplexmode.Start the PCI module 1 from ftserver utility (See Chapter 5).Remount the PCI module 1.If the problem persists,contact your sales agent.Green Off Amber Amber The PCI module 1 isperforming diagnosis(Diag).The PCI module 2operates in simplexmode.Wait for the PCI module 1 tostart. When the PCI module 1starts and duplex mode isestablished, the indicationswill return to normal.Off Off Off Off Only the PCI module 1is on standby (ACpower is suppliedthrough the cord, butthe system has notbeen powered on yet.)AC power is notsupplied to the PCImodule 2.Check if the power cord isconnected correctly.Check the condition ofbreaker and UPS.Check if the power unit isconnected correctly.Remount the PCI module 2.If the problem persists,contact your sales agent.
