NEC Express 5800/320Lb-R User Manual

Contents

7-26→ Some optional devices connected to the serial port require settings for I/O portaddress and operation mode. Refer to the manual that comes with the device toconfigure the device. → [Peripheral Configuration]> Is SCSI controller configuration correct?→ If the SCSI devices are connected to the built-in SCSI controller, check thesetting from the BIOS setup utility. Is SCSI device configuration correct?→ If external SCSI devices are connected to the server, you need to make settings ofSCSI ID and terminal resistance. For details, see manuals included with the SCSIdevice. Does the SCSI driver recognize the target devices?→ Execute the following command to check if the SCSI driver recognizes the targetdevices.>cat /proc/scsi/scsi Is a driver which supports the SCSI device loaded to kernel?→ Execute the following command to check if a driver which supports the SCSIdevice is loaded to kernel.>lsmodCPU not in Dual mode:→ Check if the memory configuration is correct.→ Check if third-party CPUs or memory (DIMM) are used.Disk not in Dual mode:→ Unless you perform mirroring (including reconfiguration after failed disks arereplaced) in correct order, the mirror may not be [re]configured. Check if the stepswere correct.