6-5Cleaning the Floppy Disk DriveA read/write error may occur due to stains on the read/write head of the floppy disk drive.Use the cleaner dedicated for floppy disk drive to clean the read/write head. It is recommended toclean the head on regular basis.Cleaning CD-ROMA dusty CD-ROM or dust-accumulated tray causes the device to fail to read data correctly.Follow the procedure below to clean the tray and CD-ROM regularly:140. Make sure that the server is powered (the POWER LED is lit).141. Press the Eject button on the front of the CD-ROM drive.The tray comes out.142. Hold the CD-ROM lightly and take it out from the tray.IMPORTANT: Do not touch the signal side of the CD-ROM with your hand.143. Wipe the tray with a dry soft cloth.IMPORTANT: Do not wipe the lens of the CD-ROM drive. Doing so may damagethe lens and may cause a malfunction of the drive.144. Gently push on the tray front to close the tray.145. Wipe the signal side of the CD-ROM with a dry soft cloth.IMPORTANT: Wipe CD-ROMs from the center to the outside. Use onlyCD-ROM cleaner if necessary. Cleaning a CD-ROM with record spray/cleaner,benzene, or thinner causes damage to the CD-ROM contents. At worst, inserting theCD-ROM into the server may cause failure.
