4-36Scan SCSI BusIf you select "Scan SCSI Bus" from the "Fast!UTIL Options" menu, the list of devices connected toeach SCSI bus is displayed in the order of SCSI IDs. The information to be displayed includes thedevice manufacturer, product name and firmware revision.SCSI Disk UtilityIf you select "SCSI Disk Utility" from the "Fast!UTIL Options" menu, the utility menu which isused to format or verify the connected SCSI devices appears.IMPORTANT: Devices can be processed in each SCSI bus and SCSI ID. Be careful not to forget theselected bus and ID. When performing low-level format, select [Advanced]-[Monitoring Configuration]-[OptionROM Scan Monitoring] and choose “Disabled” in BIOS setup utility. See “SYSTEM BIOS~ SETUP ~” (page 4-2) for details of the setting. The selection of "Continue With Format" in "Low- Level Format" causes all data in disks tobe lost. Low-Level FormatFormats the device selected in "Continue With Format" physically. If you select "Do NotFormat Disk," the previous menu appears again. Verify Disk MediaVerifies the device selected in "Continue With Verify." If you select "Do Not VerifyMedia," the previous menu appears again. Select Different DiskSelects another SCSI device on the same SCSI bus.Select Host AdapterIf you select "Select Host Adapter" from the "Fast!UTIL Options" menu, the list of the host adaptersinstalled in the main system is displayed. Select an adapter to change its settings.IMPORTANT: The adapter "QLA12160 Ultra3 2000" is used for built-in hard disk. Do notselect it.The utility menu, which is used to format or verify the connected SCSI devices, appears.
