4-21System HardwareMove the cursor onto "System Hardware" to display the System Hardware menu.The table below lists options that you can specify on the System Hardware menu screen and theirfunctions. To make a selection for "Thermal Sensor", "Wake On Event", and "Console Redirection",first select a desired option and press Enter to display its submenu.See the table below for setup options on the screen.Option Parameter Description Your SettingAC LINK Stay Off[Last State]Power OnSpecify the AC LINK feature by selecting thestatus of the power supply unit of the serverwhen the AC power supply restarts. (See thetable on the next page for details.)Waiting timefor AC-LINK[0], 10~3600 Set maximum waiting time in second forAC-LINK. If either of ACs is not supplied intime, the system will be turned on as simplexconfig. Value 0 means the system waitseternally.Range [0 or 10-3600sec.]Error LogInitializationEnter Press Enter to initialize the error log. Themessage "Error Log Cleared" appears uponsuccessful completion. If failed, the message"Error Log Not Cleared!" appears.[ ]: Factory-set
