8-36PCI BOARDUp to three PCI boards can be installed to the PCI module (however, one video board is alreadyinstalled in each module in standard configuration).IMPORTANT: The PCI board is extremely sensitive to static electricity. Make sure to touch the metal frameof the server to discharge static electricity from your body before handling the PCI board. Donot touch the PCI board terminals or on-board parts by a bare hand or place the PCI boarddirectly on the desk. For static notes, see the section "Anti-static Measures" described earlier. Make sure to read "Anti-static Measures" and "Preparing Your System for Upgrade" beforestarting installing or removing options. PCI#1 is a slot dedicated for video board, which is standard equipment. Do not replace thisbroad with any other board.TIPS: When a PCI board is installed or removed, or the slot is changed, use the BIOS setuputility "SETUP" to change the detailed settings such as interrupt line (IRQ), when necessary. SeeAppendix B for details.Note the followings to install or replace PCI board. To make a dual PCI board configuration, install the same type of board (i.e., having thesame specifications and performance) to the same slot in another group.When a PCI board is installed to one group, another identical PCI board should be installed tothe same slot in another group. This rule is applied to the case of removal. Install the PCI boards, starting from the one with the smallest number.Video boardPCI#2PCI#3Built-in riser cards of PCI module
