Configuring Your Workstation 4-29RAID CONFIGURATIONThis section describes the LSI Software RAID Configuration Utility. The LSI Software RAIDConfiguration Utility resides in LSI Software RAID and is an OS-independent program.Running LSI Software RAID Configuration UtilityOn the POST screen after power-on, press Ctrl + M or Enter when the following message appears.Press Ctrl-M or Enter to run LSI Software RAID Configuration Utility.IMPORTANT: If you fail to press Ctrl + M or Enter, or the systemproceeds without displaying the following screen, restart the system,and press Ctrl + M on POST screen.The LSI Software RAID Configuration Utility starts.LSI Software RAID Configuration Utility TOP Menu
