Installing and Using Utilities 6-19Universal RAID UtilityUniversal RAID Utility is an application to manage or monitor the following RAID Controller. Onboard RAID Controller (LSI Embedded MegaRAID)Before attempting to operate Universal RAID Utility, read the "Universal RAID Utility Ver2.3User's Guide" included in NEC EXPRESSBUILDER DVD. The manual explains the installationprocedure and notes on operating Universal RAID Utility.IMPORTANT: When using Onboard RAID Controller (LSI EmbeddedMegaRAID), do not let the system enter hibernation or standbymode.Setup with Express SetupYou can install Universal RAID Utility with Express Setup contained in NEC EXPRESSBUILDERDVD. When you start the Express Setup, a dialog to specify an application appears. Select[Universal RAID Utility] on the dialog.Manual SetupWindowsYou can start the setup program of Universal RAID Utility from [Autorun Menu].Click to [Setup Software] → [Universal RAID Utility] in [Autorun Menu].You need to install the following software. Microsoft .NET Framework 2.0 or later The Runtime component of the Microsoft Visual C++ 2005 SP1You can install these software from [Autorun Menu] too.Click [Setup Windows] → [Install the .NET Framework Ver 2.0 Redistributable Package (x86)] (IfCPU architecture is x64, [Install the .NET Framework Ver2.0 Redistributable Package (x64)]) in[Autorun Menu] for the setup of Microsoft.NET Framework 2.0.Click [Setup Windows] → [Install the Microsoft Visual C++ 2005 SP1 Redistributable Package(x86)] (Use the x86 package whatever the CPU architecture may be.) for the setup of the Runtimecomponent of the Microsoft Visual C++ 2005 SP1.