4-42 Configuring Your WorkstationLSI Software RAID Configuration Utility and Universal RAID UtilityYou can use Universal RAID Utility for configuration, management, and monitoring of OnboardRAID Controller after start up operating system.The point to keep in mind when you use Universal RAID Utility together with LSI Software RAIDConfiguration Utility is as follows.TermsLSI Software RAID Configuration Utility and Universal RAID Utility are different in term. Whenyou use Universal RAID Utility together with LSI Software RAID Configuration Utility, pleaseconvert terms according to the following list.Term of LSI Software RAID Configuration Utility Term of Universal RAID UtilityAdapter RAID ControllerVirtual Drive Logical DriveArray Disk ArrayPhysical Drive Physical DeviceNumber and IDThe number to manage each component of Disk Array of Universal RAID Utility is different to LSISoftware RAID Configuration Utility.Adapter and RAID ControllerLSI Software RAID Configuration Utility manages Adapter by a number beginning with 0. You canview a number of Adapter on [Sel. Adapter] in [Objects] menu.Universal RAID Utility manages RAID Controller by a number beginning with 1. You can view anumber assigned to RAID Controller on [Number] in the property of RAID Controller on RAIDViewer.Also, you can view the number of Adapter managed by LSI Software RAID Configuration Utilityon [ID] in the property of RAID Controller of Universal RAID Utility.
