4-6 Configuring Your WorkstationBootTo change the boot order of devices connected to the workstationSelect [Boot] and specify the boot order.To display POST check resultsSelect [Advanced] → [Boot-time Diagnostic Screen] → [Enabled].You can also press Esc while the NEC log is on the screen to display POST check results.To use the remote power-on featureSelect [Advanced] → [Advanced Chipset Control] → [Wake On LAN/PME] / [Wake OnRing].MemoryTo check the installed memory (DIMM) sizeSelect [Advanced] → [Memory Configuration] and view the settings.ProcessorTo check the processor statusSelect [Main] → [Processor Settings] and view the settings.KeyboardTo set NumlockSelect [Advanced] → [NumLock].
