D-10 Installing Windows 7Windows 7 Clean InstallationThis section explains how to perform a clean installation of Windows 7.Installation procedures are as follows:1. Turn on the system power.2. Insert the Windows 7 DVD-ROM into the optical disk drive.NOTE: When You use "Onboard RAID controller (LSI EmbeddedMegaRAID)", "Windows 7 OEM-Disk for EXPRESSBUILDER" isnecessary.3. Restart the system.To restart the system, press Ctrl + Alt + Del or turn off the system once, and then turn iton again.IMPORTANT: When prompted to [press any key to boot from CD orDVD], press Enter while the message is displayed.If the Windows installation screen (shown in step 4) does not appear,turn off the system, and then turn it on again.The DVD-ROM starts. A message "Windows is loading files …" appears.4. Select a language and other options from the drop-down lists, and then click [Next].
