Installing the Operating System with Express Setup 5-23Setup TeamAdapter Fault Tolerance (AFT) is a feature that creates a group containing more than one adapterand automatically converts the process of the working adapter to the other adapter in the groupwhen any trouble occurred on that adapter.Adaptive Load Balancing (ALB) is a feature that creates a group containing more than one adapterand enhances the throughput by operating packet transmission from the server by all the adapters.This feature includes AFT feature.Switch Fault Tolerance (SFT) is a feature that provides a failover relationship between two portswhen each port is connected to a separate switch.SFT supports two ports per team.Static Link Aggregation (SLA) accounts for the GEC and 802.3ad static protocols.SLA is a switch-assisted teaming mode and requires configuring ports at both ends of the link:server interfaces and switch ports.IMPORTANT: The adapters specified as a group of Adaptive Load Balancing(ALB) can be connected to only Switching Hub. Confirm the port setting of switching hub (L2) matches the servernetwork adapter Teaming mode. All the adapters specified as a group of Adapter Teaming mustexist on the same LAN.If they are connected to the separate switches, they will not worknormally. Refer to and delete the team first beforeexecuting the following work.– Exchange of mother board and LAN board– Change the mode type of the team
