iiiAppendix C IRQ and I/O Port Addressprovides a list of factory-set IRQs.Appendix D Installing Windows 7describes how to install Windows 7.Appendix E Installing Windows XPdescribes how to install Windows XP.Appendix F Product Configuration Record Tableprovides a table to be filled with your workstation configuration.Text ConventionsThe following conventions are used throughout this manual. For safety symbols, see "SAFETYINDICATIONS" provided earlier.IMPORTANT: Items that are mandatory or require attention when using theworkstationNOTE: Helpful and convenient piece of informationIN THE PACKAGEThe carton contains various accessories, as well as the workstation itself. See the packing list tomake sure that you have everything and that individual components are not damaged. If you findany component missing or damaged, contact your service representative. Store the provided accessories in a designated place for your convenience. You will needthem to install an optional device or troubleshoot your workstation, as well as to set it up. Improper use of any provided optical disk may alter your system environment. If you findanything unclear, immediately ask your service representative for help.OPTICAL DISK DRIVEThe following optical disk drives are factory installed in the workstation according to built-in order. DVD-ROM drive DVD Super MULTI driveFor how to use these optical disk drives, refer to the manual that comes with your workstation.For the disk which does not conform to the CD standard, the playback of such a disk with the CDdrive is not guaranteed.