Installing Windows 7 D-3About the System Partition SizeThe size for the partition that the system is to be installed can be calculated from the followingformula.Windows 7 64-bit (x64) EditionSize necessary to install the system + Paging File Size + Dump File Size + Hibernation file size +Application SizeSize necessary to install the system = 8,400MBPaging File Size (Recommended) = Mounted Memory Size * 1.5Dump file Size = Mounted Memory Size + 300MBHibernation file size = Mounted Memory SizeApplication Size = Required SizeIMPORTANT: The above-mentioned partition size is the minimum partition sizerequired for system installation. Ensure sufficient partition size forsystem operation. Following number is the recommended size.20,480MB (20GB) or more*1GB = 1,024MB The above-mentioned paging file size is recommended forcollecting debug information (memory dump). The paging file withinitial size large enough to store the dump file in the WindowsPartition is required.Correct debug information might not be able to be collected due tovirtual memory shortage when the paging file is insufficient, so setan enough size of the paging file with the entire system. Regardless of the size of the mounted memory, or the Writedebugging information (type of memory dump), the maximum sizeof the dump file is 'The size of the mounted memory + 300MB'. If you install any application program or the like, add necessaryspace to the partition to install these programs.