General Description 2-21About Write ErrorA write error might occur when writing a data by using the optical disk drive due to the operatingenvironment or characteristics of disk, etc.NEC assumes no liability for data errors and disk failures due to malfunction of the optical diskdrive.NEC recommends that you make a back-up copy of your valuable data on the other backup device,too.About Replay of Music CDNote the following when using the factory-installed optical disk drive to replay the music CD. Windows 7 / Windows XPUse Windows Media Player. Make sure that [Digital replay] has been checked in [Option]tab. Other OSConsult with your service representative.Setting DiskInsert an optical disk into the optical disk drive in the following procedure.1. Confirm that the power of the workstation is on (with the POWER/SLEEP lamp being litin green) before setting the optical disk on the optical disk drive.2. Press the Eject button on the front of the optical disk drive.The tray comes out a little.3. Hold the tray lightly and pull it out toward you until the tray stops.Tray
