4-20 Configuring Your WorkstationSecurityThe Security menu appears if you move the cursor to the position of [Security].* These items are used to set the security mode called [Secure Mode], and selectable onlywhen the User Password is set.[Hot Key] is available when "Enabled" is specified for [Peripheral Configuration] - [LegacyUSB Support].In Secure Mode, accessing from a user who does not have User Password is prohibited. Thekeyboard and mouse are disabled unless the Secure Mode is canceled.To cancel the Secure Mode, enter the User Password using the keyboard, and press Enter.Press Enter on [Set Supervisor Password] or [Set User Password], to display the password entryscreen.Enter the passwords on the dialog box. Up to eight alphanumeric characters and symbols on thekeyboard can be used for password.IMPORTANT: [User Password] can be set only when [Supervisor Password] isalready set. [Secure Mode] can be set only when [Supervisor Password] and[User Password] are already set. Set the passwords only after OS is installed. If you forget the passwords, contact your service representative.*