2-6 General Description1 Power connectorConnect with the provided power cord.2 Cabinet lockInstalling a theft prevention device protectsthe internal components of the workstationfrom being stolen.3 PCI board slotsOptional PCI boards may be installed. Some boards have connector for peripheral devices.4 Mouse connectorConnects the mouse coming with the workstation.5 Keyboard connectorConnects the keyboard coming with the workstation.6 Serial port 1 connectorConnect the workstation to a device with the serial interface. The leased line cannot beconnected to the onboard serial connector.7 Serial port 2 connectorConnect the workstation to a device with the serial interface. The leased line cannot beconnected to the onboard serial connector.8 Monitor connector (VGA)Connect the display unit if the onboard graphics accelerator is used.9 Monitor connector (DVI-D)Connect the display unit if the onboard graphics accelerator is used.10 USB connectors (6 ports)Supports USB 2.0. Connect with the device having a USB interface. Corresponding software(driver) is required.10-1 Port 0 10-2 Port 1 10-3 Port 210-4 Port 4 10-5 Port 5 10-6 Port 311 Microphone connectorConnect a microphone.12 DUMP switchPress this switch to collect memory dump when an error ocurred.13 Line Out connector (also used for headphone)Connect equipment (e.g., audio equipment) having a Line In terminal.14 Line In connectorConnect equipment (e.g., audio equipment) having a Line Out terminal.15 LINK/ACT lampIndicates the access status of LAN port.16 LAN connector1000BASE-T/100BASE-TX/10BASE-T connectorConnect with a network system on LAN.17 1000/100/10 lampIndicates the transfer rate of LAN port.
