8-6 TroubleshootingErrorcode Error message Recommended Action0B62 DIMM3 has been disabled0B63 DIMM4 has been disabled0B6F DIMM with error is enabled0B70 The error occurred duringtemperature sensor reading0B71 System temperature out of therangePower off the workstation and remove the dust from thefan if clogged. If the same error persists, contact yourservice representative.0B74 The error occurred during voltagesensor reading0B75 System voltage out of the range0B78 The error occurred during fansensor reading0BB1 SMBIOS - SROM data checksumbad.Contact your service representative.Expansion ROM not initialized Run BIOS SETUP, select [Advanced] - [PCIConfiguration] - [Option ROM Scan], and changeparameter to "Disabled" for the unbootable PCI board.Invalid System Configuration DataPCI System Error on Bus/Device/FunctionPCI Parity Error on Bus/Device/FunctionResource ConflictSystem Configuration Data Read errorSystem Configuration Data Write errorWARNING: IRQ not configuredContact your service representative.