Installing Windows XP E-15WOLRefer to the following procedure for WOL (Wake On LAN) setting.IMPORTANT: WOL supports only Standard network adapter.When PROSet is installed1. Start Device Manager.2. Point to [Network adapters] and double-click following adapter.Open the adapter [Properties].[Intel(R) 82578DM Gigabit Network Connection]3. Click [Power Management] tab and change setting in [Wake On LAN] according to thefollowing list.Setting item Using WOL Not using WOL"Wake On Directed Packet" ON or OFF OFF"Wake On Magic Packet" ON OFF"Wake on Magic Packet from power off state" ON OFF"Wake on Link" OFF OFFNOTES: Please refer to follows about function of "Wake On DirectedPacket".ON: WOL work by DirectedPacket on hibernate or standby state.OFF: WOL do not work by DirectedPacket on hibernate or standbystate. Above setting will be maintained until manually resetting areexecuted.*1 The packet which includes ethernet address of adapter in EthernetHeader or the Packet including the IP address assigned by IP Headerto adapter.4. Click [OK].5. Restart the system.
