202 Install and configure IP Trunk 3.01 (and later) nodeFigure 39NTND26 cable routing diagram5 Connect the DCH (P5) connector of the NTCW84KA to the outwardside of the 15-pin I/O panel filter connector.—End—Install filter and NTND26 cable (for MSDL and DCHIP cards indifferent Large System equipment rows)Follow the steps in Procedure 12 "Installing the filter and NTND26 cablefor MSDL and DCHIP cards in different Large System equipment " (page202) to install the filter and NTND26 cable for MSDL and DCHIP cards indifferent Large System equipment rows.Procedure 12Installing the filter and NTND26 cable for MSDL and DCHIP cards in differentLarge System equipment rowsStep Action1 Install the bracket for the 15-pin I/O panel filter connector in the J16,J17, J37 or J38 I/O panel opening of the I/O panel of the NetworkModule or Core/Net Module that contains the MSDL card.Nortel Communication Server 1000IP Trunk FundamentalsNN43001-563 02.01 StandardRelease 5.5 21 December 2007Copyright © 2007, Nortel Networks.