270 Install and configure IP Trunk 3.01 (and later) node4 Set the correct date and time.5 Click OK.The clock is updated immediately on the Active Leader card (Leader0 or Leader 1), which in turn updates the other cards in the IP Trunk3.01 (and later) node.—End—Change the default ITG shell password to maintain access securityFollow the steps in Procedure 33 "Changing the default ITG shell password"(page 270) to change the default user name and password when installingthe IP Trunk 3.01 (and later) node to maintain access security. The ITGuser name and password protects maintenance port access, Telnet, andFTP access to the Media Card 32-port and ITG-Pentium 24-port trunkcards over the LAN.Procedure 33Changing the default ITG shell passwordStep Action1 Select the new IP Trunk 3.01 (and later) node in the upper part ofthe IP Telephony Gateway - ISDN IP Trunk window.2 For each card in the node, right-click the card and select Telnet toITG card from the right-click menu.The Telnet window appears with the VxWorks prompt.3 When prompted to login, enter the default username and passwordas:VxWorks login: itgadminPassword: itgadminITG>4 Use the command shellPasswordSet to change the default username and password for Telnet to ITG shell and FTP to the IP trunkcard file system. The default user name is itgadmin and thedefault password is itgadmin.Enter the following information when prompted:Enter current username: itgadminEnter current password: itgadminEnter new username: new usernameEnter new password: new passwordNortel Communication Server 1000IP Trunk FundamentalsNN43001-563 02.01 StandardRelease 5.5 21 December 2007Copyright © 2007, Nortel Networks.
