System commands LD 32 387DISU l s c u Disable the indicated IP Trunk 3.01(and later) unit (port), where:l = loop, s = shelf,c = card, u = unitEnable an indicated IP trunk card portTo enable an indicated IP trunk card port in LD 32, use the followingcommand:ENLU l s c u Enable the indicated IP Trunk 3.01 (andlater) unit (port), where:l = loop, s = shelf, c = cardDisplay IP trunk card ID informationTo display the IP trunk card ID in LD 32, use the following command:IDC l s c Display the card ID for the card, where:l = loop, s = shelf,c = cardDisplay IP trunk card statusTo display the status of an indicated IP trunk card in LD 32, use the followingcommand:STAT l s c Display the status of the indicatedIP trunk card, where:l = loop, s = shelf, c = cardDisplay IP trunk card port statusTo display the status of a port on the IP trunk card in LD 32, use thefollowing command:STAT l s c u Display the status of the indicatedIP Trunk 3.01 (and later) port, where:l = loop, s = shelf, c = card, u = unit.Nortel Communication Server 1000IP Trunk FundamentalsNN43001-563 02.01 StandardRelease 5.5 21 December 2007Copyright © 2007, Nortel Networks.
