TM 3.1 OA and M procedure summary 347ITG Card Properties windowTo display the property sheet of an IP trunk card, double-click an IP trunkcard in the ITG Main window.The property sheet has a tree control on the left-hand side of the window,enabling control of the IP trunk card or any of the DSPs. Different propertysheets appear for IP trunk cards, DSPs, and D-channels by clicking on therequired item in the tree. ITG determines the number of DSPs at run-timewhen the property sheet opens. If the card is not responding, the number ofDSPs is unknown and no DSPs are displayed. The D-channel appears inthe tree control only if D-channel hardware exists on the card.There are tabs across the top of the ITG Card Properties window. Thefollowing sections describe the windows that appear when these tabs areclicked.ITG Card Properties Maintenance windowClick the Maintenance tab to perform maintenance operations. SeeFigure 138 "ITG Card Properties Maintenance tab" (page 347). click theappropriate button in the Maintenance window to perform the requiredoperation.Figure 138ITG Card Properties Maintenance tabThe following comments apply to the operations in the ITG PropertiesMaintenance window:• To perform Enable, Disable, and Perform operations, use the TM 3.1Maintenance Windows or System Terminal applications.• The Reset button is disabled when the IP trunk card is enabled.Nortel Communication Server 1000IP Trunk FundamentalsNN43001-563 02.01 StandardRelease 5.5 21 December 2007Copyright © 2007, Nortel Networks.
