386 OA and M using the ITG shell CLI and overlaysCommand FunctionENLC l s c Enable the described IP trunk card, where:l = loop, s = shelf, c = cardENLU l s c u Enable the described unit, where:l = loop, s = shelf, c = card, u = unitIDC l s c Print the Card ID information for the describedIP trunk card, where:l = loop, s = shelf, c = cardSTAT l s c Print the system software status of the indicatedIP trunk card where:l = loop, s = shelf, c = cardSTAT l s c u Print the system software status of the indicatedunit, where:l = loop, s = shelf, c = card, u = unitDisable the indicated IP trunk cardTo disable the indicated IP trunk card in LD 32, use the following command:DISC l s c Disable the indicated IP trunk card,where:l = loop, s = shelf, c = cardDisable the indicated IP trunk card when idleTo disable the indicated IP trunk card when idle in LD 32, use the followingcommand:DISI l s c Disable the indicated IP trunk cardwhen idle, where:l = loop, s = shelf, c = cardEnable an indicated IP trunk cardTo enable an indicated IP trunk card in LD 32, use the following command:ENLC l s c Enable the indicated IP trunk card,where:l = loop, s = shelf, c = cardDisable an indicated IP trunk card portTo disable an indicated IP trunk card port in LD 32, use the followingcommand:Nortel Communication Server 1000IP Trunk FundamentalsNN43001-563 02.01 StandardRelease 5.5 21 December 2007Copyright © 2007, Nortel Networks.
