IP Trunk 3.01 (and later) upgrades 415click the Configuration tab. "S/W version" displays the currentsoftware version as read from the IP trunk card.4 From the main card list view, select the cards to be upgraded.Upgrade all cards in the node together, unless installing a spare cardthat has older software.5 To disable all IP trunk cards to be upgraded, use one of the following:• the LD 32 DISI command from the TM 3.1 Maintenance windows• the TM 3.1 System Passthru terminal• a system management terminal directly connected to a TTY porton the system6 In the TM 3.1 IP Telephony Gateway Main window, select"View/Refresh" and verify that the card status is showing "Disabled."7 Select menu Configuration > Synchronize > Transmit.An ITG – Transmit Options dialog box is displayed.8 In the Transmit Options group box, select the radio button "Transmitto selected cards."9 In the Software Download group box, check "Card software."10 Click the Browse button to locate the IP Trunk 3.01 (and later) IPtrunk card software downloaded earlier to the TM 3.1 PC hard drive.Select the software file and click "Open" to save the selection. Thepath and file name of the IP Trunk 3.01 IP trunk card softwareappears in the edit box next to the Browse button.11 Click the Start Transmit button to begin the IP trunk card softwareupgrade process.The software is transmitted to each card in turn and is burned intothe flash ROM on the IP trunk card.Monitor the status in the Transmit Control window. Confirm thatthe IP trunk card software is transmitted correctly to all cards. Noteany error messages. Examine and correct any problems. RepeatIP trunk card software transmission until it is completed correctlyon each IP trunk card. The IP trunk cards continue to run the oldsoftware until they are rebooted.12 Reboot each IP trunk card that received transmitted software, so thatthe new software can take effect. Start the rebooting with Leader 0,then Leader 1, and lastly the Follower cards. After all the IP trunkcards have been reset and have correctly rebooted, they respond toNortel Communication Server 1000IP Trunk FundamentalsNN43001-563 02.01 StandardRelease 5.5 21 December 2007Copyright © 2007, Nortel Networks.
