Control node access with SNMP community name strings 2594 Click the Configuration tab. Record the Management IP address ofLeader 0 on the new node.5 On the Configuration tab, change the Management IP address ofLeader 0 on the new node. Enter the Management IP address of theLeader 0 card on the existing node recorded in Step 2.6 Click Change and then click OK.7 Select the new node in the upper part of the IP Telephony Gateway- ISDN IP Trunk window.8 Select menu Configuration > Synchronize > Retrieve to open theITG Retrieve Options window.9 Check only the Dialing Plan check box if the community name forboth the existing and new nodes is the same.Check the Dialing Plan check box and the Prompt user forcommunity name check box if the community name for both theexisting and new nodes are different. A dialog box appears. Enterthe new node’s community name.10 Click Start Retrieve and monitor progress in the Retrieve controlfield. Ensure the dialing plan is retrieved successfully and addedto the TM 3.1 database.11 Click Close to close the ITG Retrieve Options window and return tothe IP Telephony Gateway - ISDN IP Trunk window.12 Select the new node and double-click to open its Node Propertiessheet.13 On the Configuration tab, change the Management IP addressof Leader 0 on the new node. Enter the correct Management IPaddress of the Leader 0 card on the new node.14 Click Change and then click OK.15 Select menu Configuration > Node > Dialing Plan to open theITG Dialing Plan window.16 Inspect the retrieved dialing plan for the new node and make anynecessary modifications. Double-click a dialing plan entry to inspectits property sheet. To save modifications, click Apply and then OK.From the View menu, the option is available to view by Digits dialedor Remote Nodes.—End—Nortel Communication Server 1000IP Trunk FundamentalsNN43001-563 02.01 StandardRelease 5.5 21 December 2007Copyright © 2007, Nortel Networks.
