248 Install and configure IP Trunk 3.01 (and later) nodeSubnet mask = 255.255.255.0Subnet = 23.11.42.0IP Trunk card TLAN IP = 23.11.42.121Subnet mask = 255.255.255.0Subnet = 23.11.42.023.11.42.0 = 23.11.42.0.Therefore, the SNMP traps will be sent to the TLAN router.WARNINGNortel recommends the SNMP client (that is, the TM 3.1 PC) notbe put on the TLAN subnet.Placing the TM 3.1 PC on the ELAN subnet is a more secureconfiguration. Additionally, incorrectly configuring the SNMP trapIP address can adversely affect routing on the IP trunk card, whichcan prevent the IP trunk card from sending or receiving calls.Procedure 22Configuring SNMP Traps/Routing and IP addresses tabStep Action1 Click SNMP Traps/Routing and IPs tab. See Figure 56 "SNMP trapaddresses/Routing table IP addresses tab" (page 248).Figure 56SNMP trap addresses/Routing table IP addresses tabNortel Communication Server 1000IP Trunk FundamentalsNN43001-563 02.01 StandardRelease 5.5 21 December 2007Copyright © 2007, Nortel Networks.
