SNMP MIB 83SNMP MIB SNMP is the protocol used to communicate TM 3.1 IP Trunk 3.01 (and later)alarms or events. Support for the SNMP Management Information Bases(MIB) on the IP trunk card is composed of two parts: the standard MIB-2and extensions for the IP trunk card.MIB-2 supportSupport of MIB-2 is enabled by the use of the WindRiver SNMP agent,WindNet©. The WindNet© agent supports the following MIB-2 groups:• system• interfaces• AT• IP• Internet Control Message Protocol (ICMP)• TCP• UDP• SNMPThe WindNet agent supports both SNMP-V1 and V2c protocols.IP Trunk 3.01 (and later) SNMP agentThe SNMP agent supports the Operation, Administration, and Maintenance(OA&M) of IP Trunk 3.01 (and later), using TM 3.1. It can configure the IPtrunk card through file transfer services. The agent supports the SNMP-V1protocol.The SNMP agent provides the following capabilities:• Retrieval of system wide variables, such as:— card state— number of DSPs on the card— number of available voice channels— IP addresses— software version— number of IP Trunk 3.01 (and later) nodes in fallback (that is, PSTNoperation)• Control of D-channel state, such as:— enable— disableNortel Communication Server 1000IP Trunk FundamentalsNN43001-563 02.01 StandardRelease 5.5 21 December 2007Copyright © 2007, Nortel Networks.