102 Programming Hunt GroupsEnterprise Edge Feature Programming Telephone Guide P0908510 Issue 01• Page Zones• Voice CallAdding or removing members from a groupMembers of the group can be any Enterprise Edge set, or portable. An EnterpriseEdge set can be in more than one Hunt Group but is considered a member in eachHunt Group, increasing the total number of members in the system.There can be only one appearance of the same Hunt Group on a set. Hunt GroupDNs cannot be members of other Hunt Groups. A DN can be associated with amember of a Hunt Group and is called a member DN.Consult your customer service representative to determine your Hunt Groupnumber range.1. Select Resources, Telephony, Hunt Groups.2. Select a hunt group from the hunt group list (1-30).3. From the hunt group, select Members.4. To add a member, click Add. Enter a DN number and click Save.5. To remove a member, select the member and click Delete.Moving members of a groupMember order within a Hunt Group is important. The member order determineshow a call is routed through a Hunt Group.1. Select Telephony, Hunt Groups.2. Select a hunt group from the hunt group list (1-30).3. From the hunt group, select Members.4. Double-click a member from the member list.5. Enter the new member number (001, 002, etc.) and click OK.The list is automatically reordered.
