Forwarding your calls 69P0908510 Issue 01 Enterprise Edge Feature Programming Telephone Guide• Enter an external telephone number (using no more than 24 digits) then press˙ or OK.• Press ˙ or OK if the line you have chosen as the outgoing line is a privatenetwork line that does not require you to dial digits.If you use ALL to redirect all your lines, it is important that you wait until all the lineson your telephone light up before pressing ˙ or OK. If you press ˙ orOK before all the lines light up, those lines not lit are not redirected.Canceling Line Redirectionƒ£°›1. Press ƒ£°›.2. Select the lines you no longer want to be redirected.Allowing a telephone to redirect callsYou can turn a telephone’s ability to redirect calls on and off.You need to start a Unified Manager session to program this feature. See GettingStarted on page 13 for more information.1. Select Terminals & Sets.2. Select a DN number.3. Double-click Capabilities.4. Choose an Allow redirect setting: Yes or No.TipThe line chosen for redirecting calls on other lines can be used normally whenit is not busy on a redirected call. To avoid redirection failing because thechosen line is in use, choose a line pool with several lines in it.The system does not check that the number you give for line redirection is avalid one. If you redirect to an invalid number, redirection fails. Using anautodial button to enter the redirection number helps avoid this possibility. Anautodial button used for line redirection must be programmed to use a specificline.
