122 Using System featuresEnterprise Edge Feature Programming Telephone Guide P0908510 Issue 01You cannot forward calls to a direct-dial telephone that is outside your EnterpriseEdge system. See Making changes to Call Forward No Answer on page 25.Changing the direct-dial telephone assignmentsYour installer sets up the direct-dial telephone.You can change which direct-dial telephone a telephone is assigned to, or assign itno direct-dial telephone.You need to start a Unified Manager session to program this feature. See GettingStarted on page 13 for more information.1. Select Terminals & Sets.2. Select a DN number.3. Double-click Capabilities.4. Select a Direct dial set: Set 1, Set 2, Set 3, Set 4, Set 5, or None.Any number of telephones can be assigned to call the direct-dial telephone.HotlineA hotline telephone calls a preset internal or external telephone number when youpick up the receiver (or press ©).Bypassing a HotlinePress a line button, or use the Pre-Dial or Automatic Dial feature before you pickup the receiver or press © on a hotline telephone. See the TelephoneFeature Card or see Changing how you dial your calls on page 48.TipThe digit you dial in order to get the direct-dial telephone to ring can beprogrammed by your installer.The Enterprise Edge system cannot verify that the number you assign as anexternal direct-dial telephone is valid. Check the number before assigning itas a direct-dial telephone, and call the direct-dial telephone after you’veassigned it in order to test it.TipLabel the telephone to inform anyone using it that Hotline is active.
