P0908510 Issue 01 Enterprise Edge Feature Programming Telephone GuideTime savers for making callsStoring a number on a memory button for AutodialYou can program memory buttons for one-touch dialing of internal or externaltelephone numbers.Buttons used for lines, answer or Handsfree/Mute cannot be used as autodialbuttons. If the power to your Enterprise Edge system is off for more than three days,autodial numbers (as well as some other system programming) may be lost from thememory.Adding an autodial buttonƒ•⁄ or ƒ•¤1. Press ƒ•⁄ to program an external number or ƒ•¤ for aninternal number.2. Choose a button and then enter the number as if you were dialing it.When programming Autodial you can use:• Last Number Redial• Saved Number Redial• destination codes (choose ∆ as the line)• host system signallingChoosing a line for AutodialTo include a line selection for an external number, press the line or intercom buttonbefore you enter the number. To select a line pool, press a programmed line poolbutton, or press ∆ and enter a line pool access code.If you select a line before pressing the autodial button, the call goes out on the lineyou have selected instead of the line that is part of the autodialer programming.For the M7100 telephone, an external autodialer can be programmed only by usinga line and not a line pool.TipIf you do not include a line selection in an autodial number, the call uses yourprime line (if you have one).5
